Selling Price -
$1,884.00
2023 SCAG Power Equipment SFC SFC-21-7CV
THE BEST ON THE JOB OR AT HOME
The Scag® SFC-21 Finish-Cut Walk-Behind mower is the compact machine you’ve always wanted—packing big productivity and versatility into a 21” wide platform. On the job or at home, the SFC-21 delivers a professional quality-of-cut that leaves behind a beautiful lawn, each and every time. Capable of 3-in-1 versatility (mulching, bagging and optional side discharging), it helps you tackle whatever challenges come your way with top-notch results.
Features may include:
- EASY HEIGHT-OF-CUT ADJUSTMENT
FINE-TUNED AND SIMPLE
Easy height-of-cut adjustment allows for cutting heights from 1.5” to 4.5” in .5” increments.
- SCAG LEVEL QUALITY-OF-CUT
PERFORMANCE FOR THE LONG HAUL
Strong, stamped steel deck ensures years of worry-free performance and a consistent cut.
- GET MORE DONE WITH ONE MACHINE
DESIGNED FOR VERSATILITY
Capable of 3-in-1 versatility, giving you the ability to mulch, bag or side-discharge. Mulching and bagging attachments come standard; side-discharge accessory is available.
- BUILT TO LAST
DEPENDABLE, WORRY-FREE PRODUCTIVITY
Heavy-duty construction ensures years of dependable service and worry-free productivity.
- STAY SAFE & EFFICIENT
SAFETY MEASURES THAT KEEP YOU WORKING
Blade brake clutch allows the operator to disengage the cutter blades without shutting off the machine.
- POWERFUL TRANSMISSION & ENGINE COMBO
MAXIMUM POWER FOR TOUGH CUTS
Powerful and efficient Kohler® Command PRO® CV173 (5hp) or CV224 (7hp) engine delivers ample power, along with exceptional efficiency and dependable performance in the toughest of cutting conditions. Proven, maintenance-free GT MG 512 transmission delivers dependable 3-speed drive power.
- STAY IN PRIME CONDITION
REPLACEABLE SIDE WEAR PROTECTION
Protecting both landscaping and the integrity of the cutter deck’s edge, these replaceable pads attach to the side of the mower and help minimize wear and tear between the environment you’re working in and your machine.
- 2023
- SCAG Power Equipment
- SFC
- SFC-21-7CV
- Walking
- Model: CV224 | Type: 4 cycle, OHV, Heavy-duty industrial/commercial
- Kohler® Command PRO®
- Easy-Pull™ recoil start
- Horsepower: 7HP @ 3300 RPM
- 224 cc
- One with cast-iron cylinder bore
- air-cooled
- gas
- Quad-Clean™ four-stage
- cyclonic air filter
- Front discharge muffler with guard
- Mechanical governor with variable speed control set at 3300 rpm, idle set at 1500 rpm
- Transmission
- GT MG 512 transmission, 3-speed
- Travel Control: Variable drive control bar and 3-speed selector lever on handlebar
- 0.50" diameter
- Type: Heavy-duty Blade Brake Clutch (BBC)
- 10.5 x 3
- 9 x 2.25
- Forward: Up to 4.25 mph
- Oil: Steel oil pump; Full pressure lubrication with spin-on oil filter
- 14 gauge
- Handle Bars: 1" diameter, thick wall tubing, 3-position adjustable | Cutter Blade: 0.1345 in. thick, milled edge, wear resistant
- Operating Position: 63.0 - 68.5" | Storage Position: 41"
- 23.25"
- Operating Position (low / high): 32.75" / 43.5" | Storage Position: 22" | Cutting: 1.5" to 4.5" in 0.5" increments
- 21 inches (53.34 cm)
- 21.2"
- 1 gallon (3.785 liters) plastic tank
- without bagger: 138 lb | with bagger: 143 lb
- Safety Group: Handle actuated operator presence system
- 14 gauge deck with 14-gauge replaceable guards for strength and longevity. Deep draw stamped.
- $1,967.00
- $1,884.00
- Dover
- New
- 7874
- 2023
- SCAG Power Equipment
- SFC SFC-21-7CV
- W2400423
- Model: CV224 | Type: 4 cycle, OHV, Heavy-duty industrial/commercial
- GT MG 512 transmission, 3-speed
- gas
- Available
- 23.25"
- Operating Position (low / high): 32.75" / 43.5" | Storage Position: 22" | Cutting: 1.5" to 4.5" in 0.5" increments
Recommendations
2024SCAG Power EquipmentSWZT Hydro-Drive SWZT-52H-18FSE8707NewWalk Behind Mower
2023SCAG Power EquipmentTIGER CAT II 52IN 28 VANGUARD EFI7236NewZero Turn Mower
2023SCAG Power EquipmentTIGER CAT II 48in 23 KOHLER STCII48V-23CV7470NewZero Turn Mower
2023SCAG Power EquipmentV RIDE II 32in 16HP KAWASAKI SVRII32A-16FX7463NewStand-On